Simon John Godsill (born 2 December 1965) is professor of statistical signal processing at the University of Cambridge, and a professorial fellow at Corpus Christi College. He is also a member of the Centre for Science and Policy. His main area of research is Bayesian statistics and stochastic sampling methodologies, particularly particle filtering. == Education == Godsill obtained both undergraduate and Ph.D. degrees from the Department of Engineering at Cambridge University, whilst a member of Selwyn College. He obtained a first class degree in the Electrical and Information Sciences Tripos. The title of his 1993 Ph.D. thesis was "The Restoration of Degraded Audio Signals" and his Ph.D. supervisor was Peter Rayner, whom he shared with Michael Richard Lynch. == Career == Godsill has published over 250 articles in peer reviewed journals, along with the books Digital audio restoration: a statistical model based approach and Compressed sensing & sparse filtering. == Business interests == Godsill is currently a director of CEDAR Audio Ltd, a Cambridge-based company that applies Bayesian mathematics for purposes of noise reduction in audio data. In February 2005, the company received a Sci-Tech Academy Award (a 'Technical Oscar') for its services to the movie industry, and a stream of innovations appeared over the following years with corresponding recognition including induction into the Audio Technology Hall of Fame (2008), a Cinema Audio Society Award (2009). Godsill is also a director at Input Dynamics Ltd, a Cambridge-based company that applies Bayesian techniques to touch screen technology. Godsill is involved with the research effort at BMLL Technologies, a Cambridge spin-off working in the field of machine learning application in the financial sector.
Control engineering
Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req
Computational humor
Computational humor is a branch of computational linguistics and artificial intelligence which uses computers in humor research. It is a relatively new area, with the first dedicated conference organized in 1996. The first "computer model of a sense of humor" was suggested by Suslov as early as 1992. Investigation of the general scheme of the information processing show a possibility of a specific malfunction, conditioned by the necessity of a quick deletion from consciousness of a false version. This specific malfunction can be identified with a humorous effect on the psychological grounds; however, an essentially new ingredient, a role of timing, is added to a well known role of ambiguity. In biological systems, a sense of humour inevitably develops in the course of evolution, because its biological function consists in quickening the transmission of processed information into consciousness and in a more effective use of brain resources. A realization of this algorithm in neural networks explains naturally the mechanism of laughter: deletion of a false version corresponds to zeroing of some part of the neural network and excessive energy of neurons is thrown out to the motor cortex, arousing muscular contractions. Unfortunately, a practical realization of this algorithm needs extensive databases, whose creation in the automatic regime was suggested only recently . As a result, this magistral direction was not developed properly and subsequent investigations (see below) accepted somewhat specialized colouring. == Joke generators == === Pun generation === An approach to analysis of humor is classification of jokes. A further step is an attempt to generate jokes basing on the rules that underlie classification. Simple prototypes for computer pun generation were reported in the early 1990s, based on a natural language generator program, VINCI. Graeme Ritchie and Kim Binsted in their 1994 research paper described a computer program, JAPE, designed to generate question-answer-type puns from a general, i.e., non-humorous, lexicon. (The program name is an acronym for "Joke Analysis and Production Engine".) Some examples produced by JAPE are: Q: What is the difference between leaves and a car? A: One you brush and rake, the other you rush and brake. Q: What do you call a strange market? A: A bizarre bazaar. Since then the approach has been improved, and the latest report, dated 2007, describes the STANDUP joke generator, implemented in the Java programming language. The STANDUP generator was tested on children within the framework of analyzing its usability for language skills development for children with communication disabilities, e.g., because of cerebral palsy. (The project name is an acronym for "System To Augment Non-speakers' Dialog Using Puns" and an allusion to standup comedy.) Children responded to this "language playground" with enthusiasm, and showed marked improvement on certain types of language tests. The two young people, who used the system over a ten-week period, regaled their peers, staff, family and neighbors with jokes such as: "What do you call a spicy missile? A hot shot!" Their joy and enthusiasm at entertaining others was inspirational. === Other === Stock and Strapparava described a program to generate funny acronyms. == Joke recognition == A statistical machine learning algorithm to detect whether a sentence contained a "That's what she said" double entendre was developed by Kiddon and Brun (2011). There is an open-source Python implementation of Kiddon & Brun's TWSS system. A program to recognize knock-knock jokes was reported by Taylor and Mazlack. This kind of research is important in analysis of human–computer interaction. An application of machine learning techniques for the distinguishing of joke texts from non-jokes was described by Mihalcea and Strapparava (2006). Takizawa et al. (1996) reported on a heuristic program for detecting puns in the Japanese language. == Applications == A possible application for assistance in language acquisition is described in the section "Pun generation". Another envisioned use of joke generators is in cases of a steady supply of jokes where quantity is more important than quality. Another obvious, yet remote, direction is automated joke appreciation. It is known that humans interact with computers in ways similar to interacting with other humans that may be described in terms of personality, politeness, flattery, and in-group favoritism. Therefore, the role of humor in human–computer interaction is being investigated. In particular, humor generation in user interface to ease communications with computers was suggested. Craig McDonough implemented the Mnemonic Sentence Generator, which converts passwords into humorous sentences. Based on the incongruity theory of humor, it is suggested that the resulting meaningless but funny sentences are easier to remember. For example, the password AjQA3Jtv is converted into "Arafat joined Quayle's Ant, while TARAR Jeopardized thurmond's vase," an example chosen by combining politicians names with verbs and common nouns. == Related research == John Allen Paulos is known for his interest in mathematical foundations of humor. His book Mathematics and Humor: A Study of the Logic of Humor demonstrates structures common to humor and formal sciences (mathematics, linguistics) and develops a mathematical model of jokes based on catastrophe theory. Conversational systems which have been designed to take part in Turing test competitions generally have the ability to learn humorous anecdotes and jokes. Because many people regard humor as something particular to humans, its appearance in conversation can be quite useful in convincing a human interrogator that a hidden entity, which could be a machine or a human, is in fact a human.
Self-supervised learning
Self-supervised learning (SSL) is a paradigm in machine learning where a model is trained on a task using the data itself to generate supervisory signals, rather than relying on externally-provided labels. In the context of neural networks, self-supervised learning aims to leverage inherent structures or relationships within the input data to create meaningful training signals. SSL tasks are designed so that solving them requires capturing essential features or relationships in the data. The input data is typically augmented or transformed in a way that creates pairs of related samples, where one sample serves as the input, and the other is used to formulate the supervisory signal. This augmentation can involve introducing noise, cropping, rotation, or other transformations. Self-supervised learning more closely imitates the way humans learn to classify objects. During SSL, the model learns in two steps. First, the task is solved based on an auxiliary or pretext classification task using pseudo-labels, which help to initialize the model parameters. Next, the actual task is performed with supervised or unsupervised learning. Self-supervised learning has produced promising results in recent years, and has found practical application in fields such as audio processing, and is being used by Facebook and others for speech recognition. == Pseudo-labels == Pseudo-labels are automatically generated labels that a model assigns to unlabeled data based on its own predictions. They are widely used in self-supervised and semi-supervised learning, where ground-truth annotations are limited or unavailable. By treating predicted labels as surrogate ground truth, learning algorithms can make use of large quantities of unlabeled data in the training process. Pseudo-labeling also plays an important role in systems that must adapt to concept drift, where the statistical properties of the data change over time. In these scenarios, the model may detect that an incoming instance deviates from previously learned behavior. The system then generates a classification result for that instance, and this predicted class is used as a pseudo-label for updating or retraining model components that are becoming outdated. This approach enables continuous adaptation in dynamic environments without requiring manual annotation. In many adaptive learning pipelines, pseudo-labels are chosen when the classifier produces sufficiently confident predictions, reducing the risk of propagating errors. These pseudo-labeled instances are then incorporated into training to refresh or evolve the model's understanding of emerging data patterns, particularly when existing components show signs of “aging” due to drift or distributional shifts. This strategy reduces reliance on manual labeling while helping maintain long-term model performance. == Types == === Autoassociative self-supervised learning === Autoassociative self-supervised learning is a specific category of self-supervised learning where a neural network is trained to reproduce or reconstruct its own input data. In other words, the model is tasked with learning a representation of the data that captures its essential features or structure, allowing it to regenerate the original input. The term "autoassociative" comes from the fact that the model is essentially associating the input data with itself. This is often achieved using autoencoders, which are a type of neural network architecture used for representation learning. Autoencoders consist of an encoder network that maps the input data to a lower-dimensional representation (latent space), and a decoder network that reconstructs the input from this representation. The training process involves presenting the model with input data and requiring it to reconstruct the same data as closely as possible. The loss function used during training typically penalizes the difference between the original input and the reconstructed output (e.g. mean squared error). By minimizing this reconstruction error, the autoencoder learns a meaningful representation of the data in its latent space. === Contrastive self-supervised learning === For a binary classification task, training data can be divided into positive examples and negative examples. Positive examples are those that match the target. For example, if training a classifier to identify birds, the positive training data would include images that contain birds. Negative examples would be images that do not. Contrastive self-supervised learning uses both positive and negative examples. The loss function in contrastive learning is used to minimize the distance between positive sample pairs, while maximizing the distance between negative sample pairs. An early example uses a pair of 1-dimensional convolutional neural networks to process a pair of images and maximize their agreement. Contrastive Language-Image Pre-training (CLIP) allows joint pretraining of a text encoder and an image encoder, such that a matching image-text pair have image encoding vector and text encoding vector that span a small angle (having a large cosine similarity). InfoNCE (Noise-Contrastive Estimation) is a method to optimize two models jointly, based on Noise Contrastive Estimation (NCE). Given a set X = { x 1 , … x N } {\displaystyle X=\left\{x_{1},\ldots x_{N}\right\}} of N {\displaystyle N} random samples containing one positive sample from p ( x t + k ∣ c t ) {\displaystyle p\left(x_{t+k}\mid c_{t}\right)} and N − 1 {\displaystyle N-1} negative samples from the 'proposal' distribution p ( x t + k ) {\displaystyle p\left(x_{t+k}\right)} , it minimizes the following loss function: L N = − E X [ log f k ( x t + k , c t ) ∑ x j ∈ X f k ( x j , c t ) ] {\displaystyle {\mathcal {L}}_{\mathrm {N} }=-\mathbb {E} _{X}\left[\log {\frac {f_{k}\left(x_{t+k},c_{t}\right)}{\sum _{x_{j}\in X}f_{k}\left(x_{j},c_{t}\right)}}\right]} === Non-contrastive self-supervised learning === Non-contrastive self-supervised learning (NCSSL) uses only positive examples. Counterintuitively, NCSSL converges on a useful local minimum rather than reaching a trivial solution, with zero loss. For the example of binary classification, it would trivially learn to classify each example as positive. Effective NCSSL requires an extra predictor on the online side that does not back-propagate on the target side. === Joint-Embedding and Predictive Architectures === A major class of self-supervised learning moves beyond contrastive pairs, instead maximizing the agreement between views while preventing collapse through statistical constraints. Rooted in Deep Canonical Correlation Analysis (Deep CCA), this approach includes Joint-Embedding Architectures (JEA) like Barlow Twins and VICReg, which enforce covariance constraints to learn invariant representations without negative sampling. Deep Latent Variable Path Modelling (DLVPM) generalizes this to multimodal systems, using path models to enforce correlation and orthogonality across diverse data types. In 2022 Yann LeCun introduced Joint-Embedding Predictive Architectures (JEPA) as a step towards decision making, reasoning, and autonomous human intelligence in machines, including self-improvement through autonomous learning. Founded in representation learning, LeCun included the concept of a “world model” in JEPA which aims to enable machines to replicate human intellect by providing machines with a concept for the world in which they exist. Unlike autoencoders, JEPAs operate entirely in latent space, avoiding pixel-level noise to focus on semantic structure. Rather than just learning invariance, JEPAs learn by predicting masked latent representations from visible context. JEPA has been applied to domains such as image analysis, audio processing, and motion in images and video. == Comparison with other forms of machine learning == SSL belongs to supervised learning methods insofar as the goal is to generate a classified output from the input. At the same time, however, it does not require the explicit use of labeled input-output pairs. Instead, correlations, metadata embedded in the data, or domain knowledge present in the input are implicitly and autonomously extracted from the data. These supervisory signals, extracted from the data, can then be used for training. SSL is similar to unsupervised learning in that it does not require labels in the sample data. Unlike unsupervised learning, however, learning is not done using inherent data structures. Semi-supervised learning combines supervised and unsupervised learning, requiring only a small portion of the learning data be labeled. In transfer learning, a model designed for one task is reused on a different task. Training an autoencoder intrinsically constitutes a self-supervised process, because the output pattern needs to become an optimal reconstruction of the input pattern itself. However, in current jargon, the term 'self-supervised' often refers to tasks based on a pretext-task training setup
Manifold hypothesis
The manifold hypothesis posits that many high-dimensional data sets that occur in the real world actually lie along low-dimensional latent manifolds inside that high-dimensional space. As a consequence of the manifold hypothesis, many data sets that appear to initially require many variables to describe, can actually be described by a comparatively small number of variables, linked to the local coordinate system of the underlying manifold. It is suggested that this principle underpins the effectiveness of machine learning algorithms in describing high-dimensional data sets by considering a few common features. The manifold hypothesis is related to the effectiveness of nonlinear dimensionality reduction techniques in machine learning. Many techniques of dimensional reduction make the assumption that data lies along a low-dimensional submanifold, such as manifold sculpting, manifold alignment, and manifold regularization. The major implications of this hypothesis is that Machine learning models only have to fit relatively simple, low-dimensional, highly structured subspaces within their potential input space (latent manifolds). Within one of these manifolds, it's always possible to interpolate between two inputs, that is to say, morph one into another via a continuous path along which all points fall on the manifold. The ability to interpolate between samples is the key to generalization in deep learning. == The information geometry of statistical manifolds == An empirically-motivated approach to the manifold hypothesis focuses on its correspondence with an effective theory for manifold learning under the assumption that robust machine learning requires encoding the dataset of interest using methods for data compression. This perspective gradually emerged using the tools of information geometry thanks to the coordinated effort of scientists working on the efficient coding hypothesis, predictive coding and variational Bayesian methods. The argument for reasoning about the information geometry on the latent space of distributions rests upon the existence and uniqueness of the Fisher information metric. In this general setting, we are trying to find a stochastic embedding of a statistical manifold. From the perspective of dynamical systems, in the big data regime this manifold generally exhibits certain properties such as homeostasis: We can sample large amounts of data from the underlying generative process. Machine Learning experiments are reproducible, so the statistics of the generating process exhibit stationarity. In a sense made precise by theoretical neuroscientists working on the free energy principle, the statistical manifold in question possesses a Markov blanket.
Label noise
Label noise refers to errors or inaccuracies in the class labels of data instances. This is a widespread issue in machine learning datasets, arising from human annotator mistakes, unclear labeling instructions, automated labeling methods, or adversarial attacks in supervised learning. Label noise can be roughly divided into random noise, where labels are flipped independently of input features, and systematic noise, where mislabeling is dependent on certain patterns or biases in the data. Label noise can be damaging to model performance, especially for complex models that may overfit to noisy labels rather than generalizable patterns. Many approaches have been proposed to deal with the effects of label noise, including robust loss functions, noise-tolerant algorithms, data cleaning methods, and semi-supervised learning approaches. To reduce the impact of wrong labels during training, techniques like label smoothing, sample reweighting and using trusted validation sets are used. The role of noise-robust training paradigms and curriculum learning strategies to improve resilience against mislabeled data is also explored in recent research.
Algorithmic bias
Algorithmic bias describes systematic and repeatable harmful tendency in a computerized sociotechnical system to create "unfair" outcomes, such as "privileging" one category over another in ways that may or may not be different from the intended function of the algorithm. Bias can emerge from many factors, including intentionally biased design decisions or the unintended or unanticipated use or decisions relating to the way data is coded, collected, selected or used to train the algorithm. For example, algorithmic bias has been observed in search engine results and social media platforms. This bias can have impacts ranging from privacy violations to reinforcing social biases of race, gender, sexuality, and ethnicity. The study of algorithmic bias is most concerned with algorithms that reflect "systematic and unfair" discrimination. This bias has only recently been addressed in legal frameworks, such as the European Union's General Data Protection Regulation (enforced in 2018) and the Artificial Intelligence Act (proposed in 2021 and adopted in 2024). As algorithms expand their ability to organize society, politics, institutions, and behavior, sociologists have become concerned with the ways in which unanticipated output and manipulation of data can impact the physical world. Because algorithms are often considered to be neutral and unbiased, they can inaccurately project greater authority than human expertise (in part due to the psychological phenomenon of automation bias), and in some cases, reliance on algorithms can displace human responsibility for their outcomes, without last mile thinking. Bias can enter into algorithmic systems as a result of pre-existing cultural, social, or institutional expectations; by how features and labels are chosen; because of technical limitations of their design; or by being used in unanticipated contexts or by audiences who are not considered in the software's initial design. Algorithmic bias has been cited in cases ranging from election outcomes to the spread of online hate speech. It has also arisen in criminal justice, healthcare, and hiring, compounding existing racial, socioeconomic, and gender biases. The relative inability of facial recognition technology to accurately identify darker-skinned faces has been linked to multiple wrongful arrests of black men, an issue stemming from imbalanced datasets. Problems in understanding, researching, and discovering algorithmic bias persist due to the proprietary nature of algorithms, which are typically treated as trade secrets. Even when full transparency is provided, the complexity of certain algorithms poses a barrier to understanding their functioning. Furthermore, algorithms may change, or respond to input or output in ways that cannot be anticipated or easily reproduced for analysis. In many cases, even within a single website or application, there is no single "algorithm" to examine, but a network of many interrelated programs and data inputs, even between users of the same service. A 2021 survey identified multiple forms of algorithmic bias, including historical, representation, and measurement biases, each of which can contribute to unfair outcomes. == Definitions == Algorithms are difficult to define, but may be generally understood as lists of instructions that determine how programs read, collect, process, and analyze data to generate a usable output. For a rigorous technical introduction, see Algorithms. Advances in computer hardware and software have led to an increased capability to process, store and transmit data. This has in turn made the design and adoption of technologies such as machine learning and artificial intelligence technically and commercially feasible. By analyzing and processing data, algorithms are the backbone of search engines, social media websites, recommendation engines, online retail, online advertising, and more. Contemporary social scientists are concerned with algorithmic processes embedded into hardware and software applications because of their political and social impact, and question the underlying assumptions of an algorithm's neutrality. The term algorithmic bias describes systematic and repeatable errors that create unfair outcomes, such as privileging one arbitrary group of users over others. For example, a credit score algorithm may deny a loan without being unfair, if it is consistently weighing relevant financial criteria. If the algorithm recommends loans to one group of users, but denies loans to another set of nearly identical users based on unrelated criteria, and if this behavior can be repeated across multiple occurrences, an algorithm can be described as biased. This bias may be intentional or unintentional (for example, it can come from biased data obtained from a worker that previously did the job the algorithm is going to do from now on). == Methods == Bias can be introduced to an algorithm in several ways. During the assemblage of a dataset, data may be collected, digitized, adapted, and entered into a database according to human-designed cataloging criteria. Next, programmers assign priorities, or hierarchies, for how a program assesses and sorts that data. This requires human decisions about how data is categorized, and which data is included or discarded. Some algorithms collect their own data based on human-selected criteria, which can also reflect the bias of human designers. Other algorithms may reinforce stereotypes and preferences as they process and display "relevant" data for human users, for example, by selecting information based on previous choices of a similar user or group of users. Beyond assembling and processing data, bias can emerge as a result of design. For example, algorithms that determine the allocation of resources or scrutiny (such as determining school placements) may inadvertently discriminate against a category when determining risk based on similar users (as in credit scores). Meanwhile, recommendation engines that work by associating users with similar users, or that make use of inferred marketing traits, might rely on inaccurate associations that reflect broad ethnic, gender, socio-economic, or racial stereotypes. Another example comes from determining criteria for what is included and excluded from results. These criteria could present unanticipated outcomes for search results, such as with flight-recommendation software that omits flights that do not follow the sponsoring airline's flight paths. Algorithms may also display an uncertainty bias, offering more confident assessments when larger data sets are available. This can skew algorithmic processes toward results that more closely correspond with larger samples, which may disregard data from underrepresented populations. == History == === Early critiques === The earliest computer programs were designed to mimic human reasoning and deductions, and were deemed to be functioning when they successfully and consistently reproduced that human logic. In his 1976 book Computer Power and Human Reason, artificial intelligence pioneer Joseph Weizenbaum suggested that bias could arise both from the data used in a program, but also from the way a program is coded. Weizenbaum wrote that programs are a sequence of rules created by humans for a computer to follow. By following those rules consistently, such programs "embody law", that is, enforce a specific way to solve problems. The rules a computer follows are based on the assumptions of a computer programmer for how these problems might be solved. That means the code could incorporate the programmer's imagination of how the world works, including their biases and expectations. While a computer program can incorporate bias in this way, Weizenbaum also noted that any data fed to a machine additionally reflects "human decision making processes" as data is being selected. Finally, he noted that machines might also transfer good information with unintended consequences if users are unclear about how to interpret the results. Weizenbaum warned against trusting decisions made by computer programs that a user doesn't understand, comparing such faith to a tourist who can find his way to a hotel room exclusively by turning left or right on a coin toss. Crucially, the tourist has no basis of understanding how or why he arrived at his destination, and a successful arrival does not mean the process is accurate or reliable. An early example of algorithmic bias resulted in as many as 60 women and ethnic minorities denied entry to St. George's Hospital Medical School per year from 1982 to 1986, based on implementation of a new computer-guidance assessment system that denied entry to women and men with "foreign-sounding names" based on historical trends in admissions. While many schools at the time employed similar biases in their selection process, St. George was most notable for automating said bias through the use of an algorithm, thus gaining the attention of people on a much